High Speed Aluminum Laser Cutting Machine

Different types of sheet metal cutting machine

1. Plasma Sheet Metal Cutting Machine

A CNC controlled plasma bed is basically the cheapest form of industrial cutting available. But it’s slowly as it is basically just a plasma torch mounted on an automated gantry. While versatile in terms of materials and thicknesses its main advantage is price.

2. Water Jet Sheet Metal Cutting Machine

Water jet machines focus a very thin stream of water mixed with abrasives at extraordinary pressures and very high speed into the sheet metal. This eats away at the metal and leaves a very clean and smooth edge. Water jets are mostly used for cutting very thick sheet metal, up to a few inches thick with very high accuracy. water jets can cut metal, plastic, alloy or material with the same accuracy and finish.

3. Punch Press Sheet Metal Cutting Mahine

Punch presses use shaped tools to knock out geometry in sheet metal. Larger presses can be loaded with dozens of different types of tools for special cutting and forming. They are not typically as quick as laser cutting machine but they offer the ability to stamp, roll and form the metal while cutting. This allows for the formation of louvers, jogs,beads, and impressions which lasers cannot form, however there are maintenance costs associated with the tooling.

4. Laser Sheet Metal Cutting Machine

High powered lasers offer the fastest most accurate form of sheet metal cutting. Especialy for thin Metal sheet (0.2-16mm). Modern lasers move the cutting head over the sheets at very high speeds with incredible accuracy. While limited to 2D cutting their accuracy and speed is un-paralleled. With proper tuning and adjusting of the laser a clean safe edge can be achieved. Though not cheap they are a must have for a modern sheet metal shop.

Technical Parameter

Applications

For cutting sheet metal, especially for processing copper, aluminium with high reflecting materials, and tungsten, molybdenum with high hard materials.

Auxiliary Equipment and Function for Laser Cutting Machine

Protecting Laser Cutting Machine for a long term's operation.

Standard Equipment

1. Centrifugal Blower

Low-noise centuifugal blower could reduce metal dust pollution caused by metal processing, to protect the employee's from get harmed.

2. Water-cooling Machine

Standard water-cooling machine with small power, low consumption and high performance. Small power water-cooling machine will be effective due to the excellent performance of sheet metal fiber laser cutter and the high photoelectricity conversion efficiency.

Optional Equipment

1. Air Compressor

Optional air compressor blow and compress air during the cutting process, which can greatly reduce the using cost.

2. Air dryer, Filtering Storage Tank

Regrigerated compressed air dryer and filtering storage tank can remove water and most impurties in the air, which is the best post treatment equipment for air compressor. It can stablize the pressure of compressed air and make sure the best cutting effect.

3. Special Cutting Parts for Pipe Materials

Equip with the special gripper for cutting pipe, which can drill with intersecting line and cut off the cylindrical metal pipe, and the pipe cutting diameter area is from 20mm to 250mm, which is good for broadering the utilization ratio of equipment.

Please let me know your requirements as below before we sending you the product details:

What's the materials you plan to cut?   The thickness of the materials?    What's the size of the materials?   What is the final products?    Are you end user or machine distributor?

Cutting Samples 

Pls feel free to contact us to get more informations!